KR AUDIO VA340 Pure Class A
Stereo Tube Integrated Amplifier 20+20 Watts RMS
KR
Audio hand build some of the World’s Best Audio Products
at any price and needs no introduction to most serious Audiophiles. Click here for more information or to arrange a Demonstration |
SPECIFICATIONS
for VA300 |
|
Power
Tubes |
2 x KR300BXLS |
Output
Power |
2 x 20 WRMS (THD=3%) |
Output
Impedance |
4 or 8 ohm |
Frequency
Response |
20Hz - 20KHz (-3dB) |
Feedback |
zero |
Damping
Factor |
Approx. 2.8 |
Preamplifier |
solid-state with mechanical (reed) relays |
Remote
Control |
Volume & channel selector |
Inputs |
4 x line RCA (Cinch) |
Input
Sensitivity |
0.75VRMS/47k ohm @ 20W (for all channels) |
Power
requirements |
230/115VAC , 50/60 Hz |
Power
consumption |
240VA |
Operating
temperature |
5C to 40C |
Weight
Approx. |
36Kg |
Shipping
Weight Approx. |
44Kg |
KR AUDIO ANTARES VA300 Tube Amplifier
12+12 Watts
RMS World Class Linear Accuracy
Single-Ended Tube Amplifier - Pure Class A, Zero Feedback
KR Audio is one of the World’s Best Audio Products at any cost, needs no introduction for many Audiophiles. The Antares VA300 continues to outperform the competition and impress the world over! Running in Pure Class A, this is the baby brother to the Antares VA320 who 6moons states “The Antares VA320 is the Krell of Tube Land. B-b-b-b- bad to the bone.” Wow, The Krell of Tube Land, what an astute comparison! Whatever kind of music you play on the VA300, this SET Integrated Tube Amplifier will keep up regardless, we guarantee this to you. The resolution is simply world class. The VA300 lets you hear all of the transient details of the music, full harmonic bloom. Truly natural perspective. This amplifier delivers accurate speed, resolution, dynamic energy coupled with the sweet sound of a world class tube amplifier. Click here for more information or to arrange a Demonstration |
SPECIFICATIONS
for VA300 |
|
Single-Ended
Tube Amplifier |
Pure Class A, Zero Feedback |
Output
Tubes |
2 x KR 300B |
Output
Power |
2 x 12 Watts RMS (THD=3%) |
Bandwidth
|
20 Hz-20 kHz (-3dB) |
Output
Impedance |
4 or 8 Ohms |
Input |
1V RMS / 47k Ohms at 12 W |
Dimensions
(w/h/d) |
38.5 x 25.5 x 55 cm |
Weight
Approx. |
38kg |
Development
Tube Monobloc Amplifiers
Using
KR 300b XLS Output Tubes
6SN7WGTA Pre-Amp Tubes
GZ37 Rectifier Tubes
The VISATON SOLITUDES Completed...
They really have to be heard to be believed!
The First Speakes I Built (Back in 1996)
Quite Good too!
These were my First Real Speakers - The ALTEC 604-8G Duplex - 98.5 db efficient
And this is how the Solitudes were made...
The
Visaton Solitude Speaker
Using two 200mm Woofers (GF200) and
one Full Range 200mm (B200) Speakers
Cabinets
are made from 19mm Baltic Birch Ply
and Built exactly as the Visaton Instructions
As you see they are only semi-finished
because I could not wait for the Audition
so I have yet to do the Side Chamfers and Paint!
The Sound is Really Good and am Very Pleased
Eventually
I knew I would have to dismantle them and finish properly
So here goes back to the Workshop...
Above
is the Second Cabinet
And Below is the First one after the First Few Coats...
Probably require 10 to 12 coats with sanding in between
I will also fit Four Visaton Adjustable Spikes to the bases like this...
Lots more to come here...